Throne Luxury Bidets

Throne Installation Guide

Installation Guide

Step 1. Remove Original Cistern.
Step 1. Remove Original Cistern.
Step 2. Remove Existing Toilet.
Step 2. Remove Existing Toilet.
Step 3. Remove any fixings.
Step 3. Remove any fixings.
Step 4. Replace Cock.
Step 4. Replace Cock.
Step 5. Place flex outlet.
Step 5. Place flex outlet.
Step 6. Install filter and hose.
Step 6. Install filter and hose.
Step 7. Clean and prepare the area.
Step 7. Clean and prepare the area.
Step 8. Place bowl onto flex drain.
Step 8. Place bowl onto flex drain.
Step 9. Insert strap into flex drain connector.
Step 9. Insert strap into flex drain connector.
Step 10. Position bowl with enough space for water supply fittings.
Step 10. Position bowl with enough space for water supply fittings.
Step 11. Connect water supply to underside of toilet seat.
Step 11. Connect water supply to underside of toilet seat.
Step 12. Connect water supply to under side of toilet seat.
Step 12. Connect water supply to under side of toilet seat.
Step 13. Turn on water supply valve (cock) and check for leaks.
Step 13. Turn on water supply valve (cock) and check for leaks.
Step 14. Remove lid and disconnect pipe.
Step 14. Remove lid and disconnect pipe.
Step 15. Lift bowl again and silicone underneath and reposition.
Step 15. Lift bowl again and silicone underneath and reposition.
Step 16. Connect water supply to underside of the toilet seat.
Step 16. Connect water supply to underside of the toilet seat.
Step 17. Place toilet seat assembly onto bowl & remove plastic.
Step 17. Place toilet seat assembly onto bowl & remove plastic.
Step 18. Place toilet seat assembly onto bowl & remove plastic.
Step 18. Place toilet seat assembly onto bowl & remove plastic.